You must be careful when trying to finish an oak floor if you don’t want to damage the surface of the wood. The safer way to make oak hardwood floor finishes is to ask a help of a professional. In case you want to do it yourself, you must prepare it well so that attractive and sturdy finish can be created. If the preparation is not done properly, the wood can fall apart and it will need expensive cost for the repairs. To create fine oak hardwood floor finishes, you must learn the proper application technique including the preparation otherwise you could end up with terrible result.
To begin applying oak hardwood floor finishes, first of all, you have to sand the finish topcoat. This is the initial important step because it prevents poor absorption. Use a power sander with 120-grit sandpaper. Sand along until the oak hardwood floor finishes look dreary with the grain of the oak. If the floor is unvarnished, you can pass over this step. Take out any visible particles of dust that restrain stain absorption. You can do that for example by using a broom to sweep the oak floor or collect the small pieces of sawdust in a dustbin. To ensure that there is no dust left; mop the oak floor with wet cloth.
Oak Hardwood Floor Finish
After that, use painter’s tape to coat areas adjacent to the oak wood floor Wipe oil-based stain onto the oak floor, using a paintbrush man-made for use with oil-based oak hardwood floor finishes. Soak up overload stain with dirt-free rags and let it dry for a couple of hours. Put in extra coats for a more affluent look of hardwood floor finishes. It needs approximately 8 up to 10 hours to cure the stain. Apply a varnish or polyurethane wood sealer to the blemished oak floor, using a brush. But make sure that the brush is already cleaned with mineral spirits.
Oak Hardwood Floor – Practice
Finally the oak floor finishes is done. But don’t walk on it right away. Let the finished floor to dry approximately for about 6 up to 7 hours. When you apply oak hardwood floor finishes, there are several things to notice. To avoid wood cracks, try not to sand in opposition to the grain of oak. In addition, don’t apply oil-based stain over a polished oak hardwood surface so that the finish won’t peel. Although the technique sounds easy, it may be more complicated when it comes into practice.